SCHUNK EGU 70-IL-N-B Electric Parallel Gripper

首页 > 供应产品 > SCHUNK EGU 70-IL-N-B Electric Parallel Gripper
SCHUNK EGU 70-IL-N-B Electric Parallel Gripper
单价 面议对比
询价 暂无
浏览 7
发货 全国
品牌 SCHUNK
过期 长期有效
更新 2026-10-27 04:06
 
详细信息
  • 夹爪类型：parallel
  • 额定负载：Manufacturer does not state a workpiece payload rating for this variant; see gripping-force specifications
  • 夹持力：650 N minimum; 1300 N maximum total across both jaws
  • 行程/开口：70 mm per jaw
  • 手指长度：160 mm maximum permitted
  • 产品型号：EGU 70-IL-N-B
  • 工作压力：
  • 开合角度：
  • 位置检测：
  • 缸径：
  • 手指数量：2
  • 开启力：
  • 推荐工件重量：
  • 工作压力：
  • 重复定位精度：Gripping repeat accuracy: 0.03 mm
  • 循环频率：
  • 寿命：
  • 供电电压：24 V
  • 通信协议：IO-Link
  • 防护等级：Electronics: IP67; guide/base jaws: IP40
  • 外形尺寸：180 × 110 × 122 mm (X × Y × Z)
  • 重量：4.4 kg
  • 工作温度：5–55 °C ambient
  • 认证：
  • 抓取方式：
  • 打开时间：
  • 闭合时间：
  • 安装接口：
  • 接口：
  • 气压：
  • 真空度：
  • 技术扩展参数：EGU size 70 electric gripper, variant EGU 70-IL-N-B; maximum permitted finger mass 1.4 kg per finger; positioning repeat accuracy 0.05 mm unidirectional and 0.3 mm bidirectional; closing/opening time 1.0 s; maximum positioning speed 70 mm/s and acceleration 600 mm/s²; nominal current consumption: BasicGrip 0.78 A, logic 0.16 A; maximum current consumption: BasicGrip 1.92 A, logic 0.20 A; maximum static moments per base jaw Mx 65 Nm, My 105 Nm, Mz 80 Nm; maximum axial force Fz 1600 N; cleanroom class ISO 14644-1 Class 5:2015; 24 months or 5 million cycles in BasicGrip / 3 million in StrongGrip; aluminum-alloy anodized housing; corrosion-protected steel base jaws. Manufacturer defines gripping force as arithmetic sum of forces on both jaws. The manufacturer labels the product-page illustration as “Illustration similar”; photo shows a genuine EGU gripper but is illustrative, not guaranteed to depict every variant detail.

SCHUNK EGU 70-IL-N-B electric parallel gripper with 70 mm stroke per jaw, IO-Link interface and IP67 electronics protection.

Standard specifications

Product modelEGU 70-IL-N-B
Gripper typeparallel
Rated payloadManufacturer does not state a workpiece payload rating for this variant; see gripping-force specifications
Grip force650 N minimum; 1300 N maximum total across both jaws
Stroke / opening70 mm per jaw
Finger length160 mm maximum permitted
Number of fingers2
RepeatabilityGripping repeat accuracy: 0.03 mm
Supply voltage24 V
Communication protocolIO-Link
Ingress protectionElectronics: IP67; guide/base jaws: IP40
Dimensions180 × 110 × 122 mm (X × Y × Z)
Weight4.4 kg
Operating temperature5–55 °C ambient
Technical extension parametersEGU size 70 electric gripper, variant EGU 70-IL-N-B; maximum permitted finger mass 1.4 kg per finger; positioning repeat accuracy 0.05 mm unidirectional and 0.3 mm bidirectional; closing/opening time 1.0 s; maximum positioning speed 70 mm/s and acceleration 600 mm/s²; nominal current consumption: BasicGrip 0.78 A, logic 0.16 A; maximum current consumption: BasicGrip 1.92 A, logic 0.20 A; maximum static moments per base jaw Mx 65 Nm, My 105 Nm, Mz 80 Nm; maximum axial force Fz 1600 N; cleanroom class ISO 14644-1 Class 5:2015; 24 months or 5 million cycles in BasicGrip / 3 million in StrongGrip; aluminum-alloy anodized housing; corrosion-protected steel base jaws. Manufacturer defines gripping force as arithmetic sum of forces on both jaws. The manufacturer labels the product-page illustration as “Illustration similar”; photo shows a genuine EGU gripper but is illustrative, not guaranteed to depict every variant detail.

Image note: SCHUNK identifies this as an illustration similar to the selected variant.

Official English product source: https://schunk.com/us/en/gripping-systems/parallel-gripper/egu/egu-70-il-n-b/p/000000000001491568

SCHUNK EGU 70 family gripper illustration; manufacturer labels image similar