Pneumatic universal parallel gripper for industrial automation, with 10 mm stroke per jaw, 660 N closing force and IP40 protection. SCHUNK identifies this as a Classic-Product and lists PGN-plus-P as an alternative. The 3.3 kg value below is the manufacturer’s recommended workpiece weight under its stated force-fit calculation, not a universal payload rating.
Standard specifications
| Product model | PGN-plus 100-1 |
|---|---|
| Gripper type | Pneumatic parallel gripper |
| Stroke / opening | 10 mm per jaw |
| Grip force | 660 N closing force |
| Opening force | 725 N opening force |
| Weight | 0.81 kg |
| Recommended workpiece weight | 3.3 kg (manufacturer-recommended for force-fit gripping) |
| Operating pressure | 2.5–8.0 bar; nominal 6.0 bar |
| Repeatability | 0.01 mm repeat accuracy |
| Ingress protection | IP40 |
| Operating temperature | 5–90 °C ambient temperature |
| Dimensions | 120 × 50 × 55 mm (X × Y × Z) |
| Rated payload | 3.3 kg recommended workpiece weight for force-fit gripping; not a universal rated payload |
Additional manufacturer specifications
Closing/opening time 0.07 s; closing/opening force at zero finger length 770/845 N; maximum permissible finger length 145 mm; maximum weight per finger 1.1 kg; maximum statical moments Mx/My/Mz 80/115/70 Nm and axial force 2000 N; wedge-gear actuation; aluminum housing, steel base jaws; 36-month warranty; optional mechanical or pressure-valve gripping-force maintenance. The product page states force-fit workpiece weight is calculated using friction coefficient 0.1 and safety factor 2.
Source: SCHUNK PGN-plus 100-1 official English product page. SCHUNK labels its product picture “Illustration similar.”
